MAS (Turkey) make Uncooled Thermic fluid pump
KYP Series
Design
- Single stage, end suction centrifugal pumps.
- Main pump dimensions are compatible with DIN 24256 (ISO 2858).
- Single entry, closed type impeller is used.
- Radial vanes are used behind the impellers to lower the pressure and to balance the thrust (axial force).
- The pump and the motor are connected by means of a flexible coupling on a common base plate.
- Maintenance of the pump is very easy.
- The shaft and other rotating parts can be removed without dismantling the suction and the discharge system.
- Since the pump uses many standard parts, spare parts are readily available.
- These pumps are designed so that there is no need for external cooling.
- Due to natural convection the pump temperature decreases towards the roller bearing.
Technical Specifications
| Capacity Range (m³/h) | 10...400 | ||
| Head Range (m) | 5...100 | ||
| Operating Pressure | 16 | ||
| Operating Temperature (°C) | 100...350 | ||
| Motor Speed Range (d/d) | 1500...3000 | ||
| Suction Flange | DN 40...DN 125 | ||
| Discharge Flange | DN 32...DN 100 |
Product Catalogue
Operation & Maintainance manual
Advantages of KYP Uncooled pumps V/s Conventional Water cooled Thermic fluid pumps
Our Partial list of Esteemed Clients (for MAS Uncooled pumps)
